The presence of oil, wet (Moisture) and dust particles in compressed air is a well known fact for industrial applications. As the technology advanced with inducation of sophisticated modern machineries working on compressed air, the usage of recommended quality class of air as per machines manufacturer has become necessary. The usage of filtered, dry air as per above recommendations results in reduced wear and tear, increased machine cycle time, lower rejections, better product quality and above all considerable saving in energy.
Package consisting of common skid with provision for bare compressors mounting, Inlet/outlet Air Receivers with Dryer having fine filter combination & by-pass arrangement to deliver consistent quality air & Pressure at outlet
We provide a wide range of Air Dryers for Different Application. As per your Requirement and your Source of Air our expertise will recommended the type of Air Dryer.
The simplest way of removing moisture from compressed air is to reduce the temperature. In this TRIMECH dryer compressed air is passed through a heat interchanger where cold refrigerant at around 3 Deg C is passed through the other side of the heat interchanger.
Heat of Compress Dryer
In HOC type dryer, hot air at 140 degree Celsius to 160 degree Celsius from Compressor discharge is directly used for the desiccant regeneration. Running cost of this dryer is virtually NIL. It has two drying towers filled with the Activated alumina / Molecular sieve desiccant and they alternate in process every 4-hour automatically.
Heatless Type Air Dryers
Air/Gas drying takes place by adsorption. Dry Air from chamber-A outlet then passes through the outlet valve assembly and through the after-filter to the dry gas receiver tank. A Heatless Air Dryer is the simplest form of desiccant type gas or air dryer for achieving a dew point of -40 deg Celsius or better for compressed air systems and other gas and air dryer application.
Internal Heater Dryer
In this Dryer the inlet air Temp is 40 to 45 Deg C. and this air we will goes upto 180 Deg C. with the help of external Heater. Internally Heated Dryer is an improvised version of heatless dryer where purge air loss is very low due to regeneration is achieved by dry air at low pressure and at high temperature.
Split Flow Type Dryer
To save on purge loss & Getting a Batter Dew Point Up to Minus 60 to 65 Deg C, here part of wet air is circulated through a heater thereby increasing its moisture carrying capacity, which is used for regeneration. In this type of dryer incoming wet air is divided in a distributor.
Blower Reactive Type
In this Particular dryer, the regeneration air is supplied from a blower which is heated in a heating chamber and thus increasing its moisture carrying capacity. This hot air is passed through the desiccant bed for regeneration. And getting the batter and required Dew point.
TRIMECH ENGINEERS PVT.LTD has designed systems to condition methane generated through anaerobic digestion for optimal use in micro turbines or combustion engines, and water vapor to protect gas compressors and to remove water vapor from low-Biogas to meet contract specifications.